Physicochemical Parameter of Microcrystalline Cellulose and the Most Acceptability in Pharmaceutical Industries
DOI:
https://doi.org/10.56511/JIPBS.2015.v2.i04.pp570-578Abstract
Microcrystalline cellulose (MCC) HiCelTM is native from cellulose, which is manufactured from wood pulp. Microcrystalline cellulose is made by hydrolysis reaction at temperature and pressure in presence of catalyst, which acts as reaction process increment. It is neutralized after completion of hydrolysis and intended to be used as to make microcrystalline cellulose powder. HiCelTM MCC is white crystalline, free flowing powder and medium in particles size. MCC is free flowing with having physical & chemical properties as per limit and widely used as a pharmaceuticals aid for direct compression & wet granulation. MCC is employed for the production of solid dosage form due to its good compressibility, compatibility, and loading capacity of drugs. HiCelTM is very essential for direct compression because of its all parameter support to direct compression.
Keywords:
Hydrolysis of wood pulp, Study of different grades of HiCelTM, Physical and Chemical parameter of microcrystalline cellulose HiCelTMDownloads
References
Kirsi Leooanen, Kari Pirakkalainen, Paavo Penttila, Jenni Sievanen, Nina Kotelnikova and Ritva Serimaa: Sami-angle x-ray scattering study on the structure of microcrystalline cellulose. Journal of Physics : Conference serious 2010; 247-249.
Shokri Javad and Adibkia Khosro: Application of cellulose and cellulose derivatives in pharmaceutical industries. Journal of INTECH open science 2013; 1:855-862.
Peter M.Fechner, Siegfried wartewig, Manfred Futing,andreas Helimann, Rennhard H.H, Neubert and Peter Kleninebudde: properties of microcrystalline cellulose and powder cellulose after extrusion/ spheronization as studied by fourier transform raman spectroscopy and environment scanning electron microscopy: AAPS Pharmasci 2003; 5:15-20.
IA, H.Nissan, Chapter 2: The pulp and paper marking processes: University park,PA: Pennsylvania state university 1981; 335340.
Leppanen Kirsi, Seppo Andersson, Tarkkeli Mika, Matti Knaapila, Nina Kotelnikova, Ritava Serimaa: Structure of cellulose and microcrystalline cellulose from various wood species and flax studied by X-ray scattering: Journal of Springer Science + busnicess Media B.V.2009; 147-152.
Yakubu, A. Tanko, Mumar Sani S. D. Mohammed: Chemical modification of microcrystalline cellulose: improvement of barrier surface properties to enhance surface interaction with some synthetic polymers for biodegradable packing material processing and application in textile, food and pharmaceutical industry: Journal of Pelagia research library advance in applied research 2011; 2:532540.
John Rojas, Alvin Lopez, Santiago Guisao and Carlos Ortiz: Evaluation of several microcrystalline cellulose obtained from agricultural by products. Journal of advanced pharmaceutical technology & research 2011; 1:170-185.
Terinte Nicoleta, Ibbett Roger and kurt Christian Schuster: Overview on native cellulose and microcrystalline cellulose structure studied by X-ray diffraction (waxd): Comparison between measurement techniques. Journal of Lenzinger Berichte 2011; 8:118-130.
Soppela Iral, Airaksinen Sari, Matti Murtomaa, Tenho Mikko, Juha Hatara, Heikki Raikkanen, Jouko Yliruusi, Niklas Sandler: Investigation of the powder flow behavior of binary mixtures of microcrystalline cellulose and paracetamol. Journal of excipient and food chem 2010; 1:55-67.
Staniforth, JN: Powder flow, in aulton ME (eds), Pharamaceutices – the science of dosage form design. Churchill Livingstone, London, U.K. 2007;1045-1065.
Kumar Vijay, Sanjeev H. Kothari and Gilbert S. Banker: Compression, Compaction, and Disintegration Properties of Low Crystallinity Celluloses Produced Using Different Agitation Rates During their Regeneration from Phosphoric Acid Solutions. Journal of AAPS Pharma Science tech 2001; 1:245-250.
Jafar Ebrahimpour Kasmani, Mohammand Nemati, Ahmad Samariha, Hossein Chitsazi, Nima Seyed Mohammadi and ,Hassan Nosrati: Studing of effect of the age in Eucalyptus Camaldulensis species on wood chemical compounds used in pulping process. Journal of AmericanEurasian J. Agric. & Environ Sci2011; 6:1739.
Oyeniyi and Itiola, O.A: The physicochemical characteristic of microcrystalline cellulose, derived from sawdust, agriculture waste products. Journal of (Academic sciences) International journal of pharmacy and pharmaceutical sciences 2012; 1:196-200.
M.Nuruddin, A. Chowdhury, S.A. Haque, M.Rahman ,S.F.Farhad, M.Sarwar Jahan and A. Quaiyyum: Extraction and characterization of cellulose micrfibrils from agricultural wastes in an integrated biorefinery initiative. Journal of Cellulose chemistry and technology 2012; 1:17-20.
Necessitates in Remingtion: The science & practices of pharmacy. Editors Gennaro, A.R, Lippincott, Williams and Wilkins U.S.A.;1042-1052.
Babu S. Srekanth, Kumar A. Ajay, D.R. Suman: Co-Processed Excipients:A review. International journal of current trends in pharmaceutical research 2013; 3:70-75.
Martin: Physical pharmacy, Editors Alfred Martin, Pilar Bustamante & A.H.C. Chun, b.I. Waaverly pvt.ltd; 4:453-455.
The International Pharmacopeia 3rdedition: General method of analysis. WHO Publication 1979; 1:161-170.
Published
How to Cite
Issue
Section
Copyright (c) 2015 Monika Tomar, Ajay Kumar Singh, Amit Raj Sinha
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
Journal of Innovations in Pharmaceutical and Biological Sciences is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License. Based on a work at